1 string of red battery powered led lights (I got mine at Ikea for $3)
1 standard socket sized light bulb or a similarly sized light bulb. (just compare it to your assembled head and decide if you like it)
Krylon Looking Glass Spray Paint ( I wouldn't have bought it for just this project, but I already had some)
3-4 colors of Christmas Magic (or if you are kinda boring, glitter)
White Electrical tape
Some sort of picture hanging hardware
And you'll need this stuff too
An exacto knife with extra blades
A hot glue gun
Small paint brushes
Okey dokey, first up you'll need to print off this template at 400%. Just go into your printer settings and change it there. If you're having trouble figuring that out just ask the person in your family who's into that stuff, but do them a favor and remember what they are showing you. Once the template is all printed out, tape the 4 pages together so it's one big page. I trimmed a little bit of the margin so that I could line up the shapes perfectly. Now tape that big template to a sheet of foam core board and get to cutting. Your hand will get tired and you will need to use multiple blades. Oh and just so you know, the template is on 4 pages but you can squeeze it all into 3 sheets of foam core board. once you have all the pieces cut out you can put them together and give yourself a pat on the back.
For the head I used Brownstone on the antlers and Carrera Marble for the head.
To attach the head to the mounting plaque I just globed a bunch on hot glue on the back of the neck piece, lined up the corresponding slots and held it tight for a few minutes.
Well I hope you like it! If you make on I would Love, Love, LOVE to see it!